← All MarketsNorthwest Montana / Flathead Valley

    Dry Ice Blasting Services in Kalispell, MT

    Home base and dispatch origin. Manufacturing, heavy equipment, hospitality, and restoration work across the Flathead Valley.

    ~30,000 (Flathead Valley ~110,000) Manufacturing · Heavy Equipment · Fire Restoration · Hospitality

    Why Summit Cryo serves Kalispell

    Kalispell is our home base. Our shop, our compressors, our dry ice storage, and the dispatch board for all five states sit here in the Flathead Valley. Local job scheduling depends on crew availability and is confirmed when you enquire. Flathead Valley sites use our published 2-hour, half-day and full-day rates.

    Industrial corridors we route into

    The corridors below are where we run the most volume in and around Kalispell. If your facility sits inside one of these, you're already on a route we run regularly.

    • Evergreen / U.S. 2 corridor
      Light manufacturing, log home shops, equipment dealers, and contractor yards along U.S. 2 east into Columbia Falls.
    • Columbia Falls industrial / former CFAC
      Heavy industrial brownfield, aluminum-era infrastructure, and active wood-products operations along Highway 2.
    • Whitefish / Big Mountain hospitality
      Resort kitchens, lodge restoration, and food-service equipment around Whitefish Mountain Resort and the Wisconsin Ave corridor.
    • Glacier Park International (GPI) / FCA Airport Industrial
      Aviation ground support, hangars, and the warehousing cluster on Glacier Park Drive and Highway 2 East.
    • Bigfork / Lakeside lakefront
      High-end residential restoration, marina equipment, and food-service work along the Highway 35 east-shore corridor.

    Example jobs we run in Kalispell

    Sawmill drive trains & conveyor lines
    Pitch, sawdust, and resin buildup blasted off gearboxes, bearings, and chain housings without disassembly — a regular ask from Flathead Valley wood-products operators.
    Fire & smoke restoration on Whitefish & Bigfork residential
    Post-wildfire soot remediation on log-home interiors, beam structures, and HVAC plenums for insurance and restoration GCs.
    Resort kitchen deep clean
    Hood plenums, oven exteriors, conveyor ovens, and fryer batteries cleaned overnight at Whitefish lodging properties between shoulder-season changeovers.
    Logging & heavy-equipment undercarriages
    Pitch, mud, and road grime stripped from skidders, feller bunchers, and lowboys before sale, inspection, or off-season storage.
    Dispatch & travel

    In the Flathead Valley: 2-hour rapid deployment $800 plus $250 mobilization, 4-hour half day $1,400 and 8-hour full day $2,400 (mobilization included). Outside the Flathead Valley: $350 per hour plus travel, 1-day minimum. We confirm from your address whether the site is in the Flathead Valley on the written estimate. We can also fold a Kalispell site into a route day already heading toward Missoula or Sandpoint.

    Pilot → recurring program

    Most local accounts start with a single industrial or restoration job, then move to a quarterly or monthly route. Hospitality customers tend to pilot a shoulder-season deep clean and convert to a twice-a-year cadence aligned with their changeover weeks.

    Counties & communities served

    From our Kalispell dispatch radius we cover the following counties and surrounding communities — call for jobs outside this list:

    • Flathead County
    • Lake County
    • Lincoln County
    • Sanders County

    Industries served in Kalispell

    The Kalispell industry mix below, with the cleaning applications that match each one. Every job is scoped individually after a walk-through or photos.

    Request a walk-through

    Cleaning applications we run in Kalispell

    Tuned to Kalispell's industry mix — manufacturing, heavy equipment, fire restoration. Each one is a dry-ice fit for a specific reason, and most local jobs combine two or three.

    All applications

    Pricing in Kalispell

    Flathead Valley: 2 hrs $800 + $250 mobilization · 4 hrs $1,400 · 8 hrs $2,400 · Outside the valley: $350/hr plus travel, 1-day minimum.

    2-hour rapid deployment
    $800

    plus $250 mobilization · Flathead Valley only

    4-hour half day
    $1,400

    mobilization included · Flathead Valley

    8-hour full day
    $2,400

    mobilization included · Flathead Valley

    Outside the Flathead Valley
    $350/hr

    plus travel, 1-day minimum

    Mobilization: Home base — the rig, compressors and dry ice storage are here.

    Service zone: Flathead Valley: 2 hrs $800 + $250 mobilization · 4 hrs $1,400 · 8 hrs $2,400 (mobilization included).

    We confirm from your site address whether the job is in the Flathead Valley.

    Single-asset and single-day jobs are viable here — no routing requirement.

    Final scope and price are confirmed after a site review and, where appropriate, a test patch. Full rate card.

    Kalispell questions, answered

    Are you actually based in Kalispell, or is this a referral page?

    We're physically based in Kalispell — shop, compressors, dry ice storage, and dispatch all live here. Every five-state route originates from our Flathead Valley base.

    How fast can you get to a job in the Flathead Valley?

    Scheduling depends on crew availability and travel; for fire and smoke losses we prioritize routing where we can, but timing is confirmed when you enquire, not guaranteed in advance.

    How is travel handled for local Kalispell jobs?

    In the Flathead Valley: 2-hour rapid deployment $800 plus $250 mobilization, 4-hour half day $1,400 and 8-hour full day $2,400 (mobilization included). Outside the Flathead Valley: $350 per hour plus travel, 1-day minimum. Travel outside the valley is itemised on the written estimate.

    Request a Kalispell quote

    This form runs on the same live lead flow as the rest of the site — it lands on our dispatch board and in the ops inboxes, and you get an emailed acknowledgement as soon as it is received.

    Up to 8 files, 25 MB each. JPG, PNG, WebP, HEIC, MP4 or PDF. Files stay private to our estimating team.

    Kalispell — buyer voices

    What customers in this market tell us

    Site walk and written scope

    We walk the assets with you before quoting, then send a written scope so there is no ambiguity about what is and isn't included.

    Test patch before full scope

    We run a test patch on the actual substrate before committing to the full job, so you can see the result before we proceed.

    Your maintenance window

    We work inside your maintenance window, subject to site access and ventilation requirements — not the other way around.

    Photo and time log on completion

    Every job closes with a photo record and a time log, so you have documentation on file for your own records.

    Ready to scope a cleaning window?